Free preview. This lesson is part of a paid course that earns the ETA Specialist: Cobots and Mobile Robots credential. About this course
Collaborative robots: what they are and aren't
In this lesson you'll
- Explain what a collaborative robot application is, using the 2025 standards' language
- Name the four ways robots and people can safely share space
- Spot the "it's a cobot, so it's safe" mistake
Welcome
Welcome to Cobots and Mobile Robots on the Floor from the Enterprise Technology Association (ETA). This course is for manufacturing, warehouse and distribution teams: supervisors, engineers, safety leads, maintenance techs and operators who will choose, set up, run or work next to collaborative robots and autonomous mobile robots. You'll finish with a capstone: a deployment plan for one real application, reviewed by ETA. It builds on the free Robotics Fluency: Foundations course and its Robot fit check.
- Step 1: Assess
Is this a good task for AI, and what's at stake?
- Step 2: Direct
Brief the AI clearly: goal, context, constraints, done criteria.
- Step 3: Assure
Check the output before you rely on it.
- Step 4: Protect
Keep people, data and your organization safe.
- Step 5: Tune
Iterate, then save what works for next time.
Use the steps in order on every task, and loop back to Tune when results fall short.
From "cobot" to "collaborative application"
A collaborative robot, or cobot, is usually a small or medium robot arm designed to work near people without a full fence. Many have rounded shapes, force sensing in the joints and simple programming by hand-guiding or a tablet.
The robot safety standards revised in 2025 (ISO 10218-1 and -2, adopted in the US as ANSI/A3 R15.06-2025) make an important shift: they talk about collaborative applications, not collaborative robots. Whether a setup is safe depends on the robot, the tool it holds, the part, the speed, the task and the people nearby. A "cobot" with a sharp blade, a hot glue gun or a heavy part can hurt someone. A large industrial robot with the right sensors can work collaboratively.
Four ways to share space
The standards describe four ways a robot and a person can share a workspace:
- Safety-rated monitored stop. The robot stops when a person enters the shared area and resumes when they leave.
- Hand guiding. A person moves the robot by hand, with a guiding device, to teach or position it.
- Speed and separation monitoring. Sensors track how close people are; the robot slows as they approach and stops before contact.
- Power and force limiting. The robot is designed and set so that if contact happens, the force and pressure stay below limits for the body part that could be hit.
Most cobot cells use power and force limiting, often combined with speed and separation monitoring from area scanners.
When cobots fit
Cobots fit best where tasks are repetitive but change often, volumes are moderate, floor space is tight and people need to work nearby: machine tending, packing, screwdriving, light assembly, inspection, palletizing light cases. They are usually slower than fenced industrial robots and carry lighter payloads. If you need high speed or heavy parts, a fenced or scanner-guarded industrial cell may be the better choice.
Workplace example: a plastics molder
A molder bought a cobot to tend an injection press, labeled "collaborative" by the maker. The integrator's risk assessment found the gripper's pinch points and the press's moving platen were hazards even at reduced speed. They added an area scanner to slow the robot when operators approached, padded the gripper and kept operators out of the press area during cycles. The cell ran safely next to people on all three shifts.
Try it
In your approved AI tool:
Goal: Sort tasks in my area by how well they fit a collaborative robot application.
Context: I work in [area] at a [type] plant or warehouse. Tasks: [list 5 to 8, with part weight, cycle time and how often the task changes].
Constraints: For each task, say whether a collaborative application, a fenced or guarded robot cell, a mobile robot or no robot fits best, and name the main safety concern (tool, part, speed, pinch points). Don't name vendors.
Format: A table with one row per task.
Done criteria: Our safety lead would agree with the safety concerns.Check it with an operator who does the tasks.
Key takeaways
- The 2025 standards talk about collaborative applications: safety depends on the whole setup, not a label.
- The four ways to share space are monitored stop, hand guiding, speed and separation monitoring, and power and force limiting.
- Cobots fit moderate-volume, changeable tasks with people nearby; heavy or fast work may need a guarded cell.
Sources
